6YOE
Structure of Lysozyme from SiN IMISX setup collected by still serial crystallography on crystals prelocated by 2D X-ray phase-contrast imaging
X-RAY DIFFRACTION
Starting Model(s)
Initial Refinement Model(s) | |||
---|---|---|---|
Type | Source | Accession Code | Details |
experimental model | PDB | 5D5F |
Crystallization
Crystalization Experiments | ||||
---|---|---|---|---|
ID | Method | pH | Temperature | Details |
1 | LIPIDIC CUBIC PHASE | 4.5 | 293 | 0.5-1 M NaBr, 50-100 mM CH3COONa, pH 4.5, and 15-30 %(v/v) PEG400 |
Crystal Properties | |
---|---|
Matthews coefficient | Solvent content |
2.17 | 43.44 |
Crystal Data
Unit Cell | |
---|---|
Length ( Å ) | Angle ( ˚ ) |
a = 78.5 | α = 90 |
b = 78.5 | β = 90 |
c = 40.46 | γ = 90 |
Symmetry | |
---|---|
Space Group | P 43 21 2 |
Diffraction
Diffraction Experiment | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID # | Crystal ID | Scattering Type | Data Collection Temperature | Detector | Detector Type | Details | Collection Date | Monochromator | Protocol | |||||
1 | 1 | x-ray | 100 | PIXEL | DECTRIS EIGER X 16M | 2019-12-04 | M | SINGLE WAVELENGTH |
Radiation Source | |||||
---|---|---|---|---|---|
ID # | Source | Type | Wavelength List | Synchrotron Site | Beamline |
1 | SYNCHROTRON | SLS BEAMLINE X06SA | 1 | SLS | X06SA |
Serial Crystallography
Sample delivery method | ||
---|---|---|
Diffraction ID | Description | Sample Delivery Method |
1 | fixed target |
Fixed Target | ||||||
---|---|---|---|---|---|---|
Diffraction ID | Description | Sample Holding | Support Base | Motion control | Sample Solvent | |
1 | IMISX | SiN | 3D-printed holder in standard goniometer base |
Data Collection
Overall | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID # | Resolution (High) | Resolution (Low) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Net I Over Average Sigma (I) | Redundancy | Number Reflections (All) | Number Reflections (Observed) | Observed Criterion Sigma (F) | Observed Criterion Sigma (I) | B (Isotropic) From Wilson Plot | |||||||
1 | 1.85 | 55.51 | 100 | 0.26 | 0.99 | 2.3 | 11.29 | 11247 | 46.37 |
Highest Resolution Shell | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID # | Resolution (High) | Resolution (Low) | Percent Possible (All) | Percent Possible (Observed) | Rrim I (All) | CC (Half) | Mean I Over Sigma (Observed) | Redundancy | Number Unique Reflections (All) | ||||||||||
1 | 1.85 | 1.89 | 96.4 | 1.2 | 0.22 | 0.85 | 5.6 |
Refinement
Statistics | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Diffraction ID | Structure Solution Method | Cross Validation method | Starting model | Resolution (High) | Resolution (Low) | Cut-off Sigma (F) | Number Reflections (Observed) | Number Reflections (R-Free) | Percent Reflections (Observed) | R-Factor (Observed) | R-Work | R-Free | Mean Isotropic B | ||||||
X-RAY DIFFRACTION | MOLECULAR REPLACEMENT | FREE R-VALUE | 5D5F | 1.85 | 55.51 | 1.33 | 11247 | 563 | 99.8 | 0.2644 | 0.2633 | 0.2846 | 47.06 |
Temperature Factor Modeling | ||||||
---|---|---|---|---|---|---|
Anisotropic B[1][1] | Anisotropic B[1][2] | Anisotropic B[1][3] | Anisotropic B[2][2] | Anisotropic B[2][3] | Anisotropic B[3][3] | |
RMS Deviations | |
---|---|
Key | Refinement Restraint Deviation |
f_dihedral_angle_d | 16.1881 |
f_angle_d | 0.4448 |
f_chiral_restr | 0.0372 |
f_plane_restr | 0.0032 |
f_bond_d | 0.0026 |
Non-Hydrogen Atoms Used in Refinement | |
---|---|
Non-Hydrogen Atoms | Number |
Protein Atoms | 1000 |
Nucleic Acid Atoms | |
Solvent Atoms | 55 |
Heterogen Atoms | 21 |
Software
Software | |
---|---|
Software Name | Purpose |
CrystFEL | data scaling |
PHENIX | refinement |
CrystFEL | data reduction |
PHENIX | phasing |